Electrical Contractor Training Program Nominees Modules

Electrical Contractor Training Program (Nominees)

Course Schedule Enrol Now Enquire Now Download Brochure

Course Overview

In Western Australia, the Electricity (Licensing) Regulations 1991 provide that electrical contracting work may only be carried out by persons holding the appropriate electrical licence as issued by the Electrical Licensing Board.

This Building and Energy approved course satisfies the Electrical Contractor Training Program (ECTP) and provides licensed electricians with the training, skills and knowledge required to identify, investigate and apply statutory and legislative requirements, manage jobs and operate a business and inspect and test electrical installation work according to regulatory requirements.

Core Units of Competency

Code	Description	Nominal Hours
WAE200	Electrical Operational Requirements	40

Pre-requisites

Pre-requisite
Entry to the module WAE200 will require applicants to hold a current WA Unrestricted Electrician Licence

Course Locations & Dates

Location	Date
Jandakot	03/07/2023
Jandakot	21/08/2023
Jandakot	09/10/2023
Jandakot	30/10/2023
Joondalup	14/08/2023
Joondalup	11/09/2023
Joondalup	09/10/2023
Joondalup	30/10/2023
Joondalup	11/12/2023

Course Content

The Electrical Contractor Training Program consists of three competency based modules: EA102, EA103B and WAE200.

Regulation 38 of the Electricity (Licensing) Regulations 1991 provides for the issue of an In-House Electrical Installing Work Licence where an employer engages or employs an electrical worker to carry out electrical installing work other than maintenance work in respect only of premises owned, leased, or occupied by the
employer. Regulation 36 requires that the applicant, or at least one person in the employ of the applicant, is the holder of a current WA Electrician’s Licence and that person has, to the satisfaction of the Electrical Licensing Board, complete the following modules of the ECTP:

WAE200 Electrical Operational Requirements (40 hours)

Module Learning Outcomes

Investigate and identify WA Legislation relevant to the electrical operations of an organisation in provision of electrical services.
Analyse the intent and implications of the identified legislation and apply same to the process of an electrical contracting company.
Apply current Australian electrical standards and relevant W.A. State publications to a variety of situations associated with small to large low voltage electrical installations.
Describe and apply specific statutory technical and occupational requirements associated with the functions and duties of electrical personnel.
Analyse and apply the correct procedures for the inspection, testing and verification of low voltage electrical installations.
Analyse and apply the correct procedures for the inspection and testing of permanently connected low voltage electrical appliances / equipment.
Determine and apply appropriate safe working practices and supervisory procedures in an electrical environment.

Certification & Assessment

Graduates will be issued with a Certificate of Completion. Application for licence issue should be made to Building and Energy: http://www.commerce.wa.gov.au/building-and-energy/electrical-licence (within twelve months of completing the mandatory course modules).

Course Fees

Non-Subsidised Fee: AUD $797

Please note, a resubmission of your assignment does not incur any cost. However, only one resubmission will be granted.
If after a resubmission you have not been found satisfactory, you need to re-enrol.

How To Enrol

To enrol, you can enrol online by selecting the ‘Enrol Now’ button at the top of the page, or complete and return the course registration form (found on the downloadable brochure).

Your booking is not guaranteed until payment and registration has been received. Under no circumstances will registration without payment entitle you to a place on the course.

Course Materials

Applicants are required to obtain the following resources prior to course commencement:

Available at both CET campuses:

AS/NZS 3000 (current edition)
AS/NZS 3008.1.1 (current edition)
AS/NZS 3760 (optional)

Available at the State Law Publisher:

Electrical (Licencing) Regulations 1991 (current edition)
Electricity Regulations 1947 (current edition)

Available at Building and Energy:

WA Electrical Requirements (current edition)

Disclaimer: Standards are subject to change without notice. Applicants should check for the latest version before purchase.

Course Duration

5 Day(s)

Course Requirements

Entry to module WAE200 will require applicants to hold a current WA Unrestricted Electrician’ Licence.

Fully enclosed shoes must be worn at all times in CET buildings. Safety boots/shoes must be worn when working in the workshop.

Prior to course commencement the student is required to review CET's Code of Conduct found at Terms & Conditions/Policies page and undertake pre course reading and pre course review activities via an online platform - CET Learning.