Fibre Optics

Location	Date
Jandakot	On demand.
Joondalup	30/06/2022

A Statement of Attainment will be issued for each Unit of Competency completed. Graduates will be eligible to register with one or more of the following Cabler Registrars for recognition as an ACMA Open Cabler.

• Australian Cabler Registration Service
• Australian Security Industry Association Ltd,
• Fire Protection Association Australia
• Registered Cablers Australia Pty Ltd
• Australian Cabler Registry Services.

Subsidised Fee: AUD $510
Non-Subsidised Fee: AUD $750
NECA Member Fee: AUD $720

Fees are subject to change.

* NECA Member Fees only applicable to group 1-11 members

You can register your interest in this course by clicking the 'Register your Interest' button above.

 

It is recommended that applicants obtain the following resources prior to course commencement:

• AS/CA S008 (latest edition)
• AS/CA S009 (latest edition)
• AS/NZS 3080 (latest edition)
• AS/NZS 3084 (latest edition)

Standards are subject to change without notice. Applicants should confirm the current version prior to purchase.
 

2 Day(s)

To gain entry into this course, applicants must hold a current ACMA Open Cabler Registration and be able to meet all pre-requisites of the unit. 
 

Pre-requisite Unit(s) of Competency UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE104A Solve problems in d.c. circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules standards, codes and specifications UEENEEF102A Install and maintain cabling for multiple access to telecommunications services

Fully enclosed shoes must be worn at all times in CET buildings. Safety boots/shoes must be worn when working in the workshop. 

Prior to course commencement the student is required to review CET's Code of Conduct found at Terms & Conditions/Policies page

The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit
of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply.

CET accepts and provides credit to learners for units of competency and/or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by either AQF certification documentation issued by any other RTO or AQF authorised issuing organisation or an authenticated VET transcript issued by the Registrar.

If you believe you are entitled to Skills Recognition, we encourage you to complete an application form available from our administration team.

Prior to course commencement the student is required to review the CET's Code of Conduct found at Terms & Conditions/Policies page